1. Installation of tools and materials  

 The cutting tools and materials used for CNC lathe processing are first installed.  To be fixed firmly, avoid activities in the process of processing.  If the installation position is offset, the accuracy will be poor, so it is essential to implement the positioning with high precision.  

2. Rough processing  

 Next, rough machining is performed to cut the rough shape of the desired product.  This process does not require high precision, but be careful not to cut too much.  In addition, please also pay attention to the rotation of the material, chip production condition. 

3. Finish  

 After rough cutting out the rough shape of the product, the implementation of finishing.  Because of the need for higher accuracy, so the processing should be repeated attention to speed, feed speed.  If there is a burr, the file needs to be carefully removed, taking care not to damage the processing surface.  

When parts are manufactured using a lathe, the necessary accuracy needs to be achieved at the lowest possible cost.  

As a matter of attention in the design, it is very important to reduce the cutting amount of materials and shorten the processing time.  In addition, delivery times can be shortened and costs reduced by using common tools instead of special tools.  

When implementing cnc turning machining, it is very important to avoid complexmachining sequence and tool selection as far as possible.  This is not something that can be learned overnight. It is best to share the experience of skilled craftsmen. 

CNC turning machining is a kind of cutting processing, is the cutting tool and rotating material contact processing.  Using lathe, it can be used for outside diameter machining, inside diameter machining, thread cutting, opening machining and cutting machining.  There are many types of lathes, such as universal lathes, CNC lathes, bench lathes, end lathes and vertical lathes, so they need to be used appropriately according to the purpose.  Although machining with high dimensional accuracy is possible, it is important to share technology due to the long processing time, high precision requirements and the need for skilled workers.