Large lathe machining is an important machining method, which uses digital instructions composed of numbers, words and symbols to achieve one or more mechanical equipment action control technology, usually used in the manufacture of large workpieces, such as aerospace, shipbuilding, energy, heavy machinery and military industry and other fields.

In order to ensure operational safety and work efficiency during large lathe processing, a series of safety regulations must be strictly observed. Here are some key safety regulations:

1.Personal protection: When operating a lathe, you must wear appropriate personal protective equipment, such as safety glasses, gloves and earplugs, to protect your eyes, hands and hearing.

2.Equipment inspection: Before operating the lathe, ensure that the lathe and related equipment are in normal working condition. For example, the tool must be firmly fastened, the power cord should not be damaged, and the cutting fluid should be appropriate and suitable.

3.Working area finishing: Arrange the working area of the lathe reasonably to ensure that there is no debris, grease and water around to prevent slipping and liquid splashing. In addition, irrelevant items should not be placed near the lathe, and the work area should be kept clean and ventilated.

4.Workpiece fixation: During the processing, the workpiece must be firmly fixed to prevent the workpiece from flying out of the lathe or improper contact between the rotating tool and the workpiece.

5.Cutting fluid and support: Use the right cutting fluid to reduce heat and friction while providing good cutting conditions. For large workpieces, appropriate supports and clamps should be used to stabilize the position of the workpiece and avoid unnecessary vibration.

6.No adjustment and maintenance: When the lathe is running, it is absolutely prohibited to make any adjustment and maintenance work. All adjustments and maintenance work must be carried out after the lathe has been completely stopped.

7.Abnormal handling: When the cutting feed transmission device is abnormal, the lathe should be stopped immediately and the maintenance personnel should be notified for maintenance.

8.Concentration: When operating the lathe, it is necessary to concentrate and not be distracted or slack to avoid accidents.

9.Operation specifications: In strict accordance with the operating procedures of lathe processing, including loading and unloading chuck, using protective cover, adjusting the position of the workpiece, etc., to ensure that each step of the operation meets the safety requirements.

Compliance with these safety regulations is essential to ensure personal safety and ensure the quality of product. In addition, regular safety training and equipment maintenance are also important measures to ensure the safety of the lathe machining process.